Broadband for rural Kent Ltd
Starlink DC PoE Injector
Starlink DC PoE Injector
Couldn't load pickup availability
Starlink PoE injector for DC power applications such as off-grid and vehicle applications.
| Parameter | Value |
|---|---|
| Configuration | 4 Pair |
| PoE Injection type | Passive |
| Pinout | +V: 1,2,3,6 -V: 4,5,7,8 |
| Network speed compatibility | 10/100/1000 Mb/s |
| Input voltage | 48-57 VDC |
| Input/output current | 3A max |
| Protections | Surge protection, Internal fuse |
| Operating temperature | -20 to +55 °C |
| Operating humidity | 10 - 90% (non-condensing) |
| Storage temperature | -40 to +70 °C |
A suitable power supply is required to use this PoE injector.
If powering from an AC (mains power source) we recommend:- Mean Well LRS-150F-48RS
If powering from a 12V DC power source you will need a voltage converter:- Mad Hornets 12V to 48V 192W DC/DC converter
This PoE injector requires the Starlink cable to be cut and terminated to a standard Ethernet connector.
You will not be able to use the Starlink router with this product. This means you can use your own router which gives you far more flexibility and control over your Wi-Fi network. The Starlink router should be set into bypass mode before removing and connecting this power supply. For the best experience ensure that the router you use supports both IPv4 and IPv6 and is set to "obtain IP address automatically".
Please contact us if you require further information about this product.
*** This product is for DIY AC/DC Starlink power applications and we do not accept any responsibility if you damage this or your Starlink dish or router when using this product. Providing it is correctly wired this product will not damage the dish and will work perfectly. ***
